Regarding the specific working principle of the Mistak fabric knitting machine, it is not directly mentioned in the currently available information. However, based on the general principles of knitting machinery, I can introduce you to the basic workflow of a knitting machine (especially a weft knitting machine), which may help you understand how similar equipment operates.
Basic working principle of knitting machine
The knitting machine bends the yarn into loops through knitting needles, and the loops are intertwined with each other to form a knitted fabric. The following is a typical loop forming process of a weft knitting machine, which is divided into several key stages:
1
Holding the loop: The new loop after looping is hung on the needle hook, and is pulled to the back of the needle by the weight or presser foot to prevent the loop from falling off during unwinding.
Unwinding: The latch needle moves forward under the action of the triangular mechanism. The old coil moves forward with the needle, but is blocked by the fabric pressure plate. The coil slides through the needle latch to complete the unwinding.
Yarn padding (thread feeding): The yarn is introduced into the needle hook from the thread feeding nozzle to prepare material for the new coil.
Closed mouth: The latch needle retreats, the old coil pushes the needle latch to close, and the needle hook is closed.
Loop: The latch needle continues to retreat, the latch is completely closed, and the yarn is fixed in the needle hook.
De-looping and loop-forming: The latch needle returns to the initial position, and the old coil slips off the needle under the action of the settling column to form a new coil. At the same time, the pulling device maintains coil tension.
